Request Information Download PDF
GTMG3071-15VV-X.X-PP GTMG3071-15VV-X.X-PP
Information
Model NumberGTMG3071-15VV-X.X-PP
DescriptionGTMG3071-15VV-X.X-PP, Medical Power Supply, Encapsulated in plastic housing, Modular Medical Power Supply, , Input Rating: 85 ~ 264VAC, 125 ~ 373VDC (47 ~ 63Hz), Solder Pins 2 * Ø1.05 mm, 3.5 mm Long, 20 mm Center to Center between Pins, Output Rating: 15 Watts, 5-24V in 0.1V increments, Approvals: CE China RoHS RoHS 2 Ukraine VCCI WEEE Double Insulation cRUus PSE
Agency Documentshttp://www.globtek.info/certs/GTMG3071-WWVV-X.X-PP/
CE EC-Declaration for Medicalhttp://globtek.force.com/models/ec_declaration?id=a0Oa000000MEhUvEAL
CE EC-Declaration for Industrial/Commercial/ITEContact GlobTek for more information
RoHS/RoHS2 Declarationhttp://www.globtek.com/pdf/rohs_cert/a0Oa000000MEhUvEAL
REACH Declarationhttp://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttp://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypeEncapsulated in plastic housing
TechnologyModular Medical Power Supply
CategoryMedical Power Supply
Input Voltage85 ~ 264VAC, 125 ~ 373VDC (47 ~ 63Hz)
I/P Amps (A)0.35A / 115VAC, 0.2A / 230VAC
Wattage (W)15
Vout Range (V)5-24
EfficiencyN/A
Ingress ProtectionIPX0
Size (mm)53.0x22.7x75.0
EnclosureUser-added image
 
Rating Table
Model Number VoltageAmps (A)Watts (W) RFQ
GTMG3071-1505-PP 5315 RFQ
GTMG3071-1512-PP 121.2515 RFQ
GTMG3071-1515-PP 15115 RFQ
GTMG3071-1524-PP 240.6315.12 RFQ
SpecificationsFeatures:
Universal AC input / Full range
Medical safety approval: ANSI / AAMI ES 60601-1 / TUV EN 60601-1: 2006; IEC 60601-1 / 2xMOPP
Isolation class Ⅱ
Green design, No-load power consumption < 0.3W
Protection: Short circuit, Over load, Over voltage
Brown-out (Low AC Input Voltage)
High operation temperature up to 70°C
Withstand 2G vibration test


ELECTRICAL SPECIFICATIONS:
Output
DC Voltage Range: 5V 12V 15V 24V
Rated Current: 3A 1.25A 1.0A 0.63A
Current Range: 0 ~ 3A 0 ~ 1.25A 0 ~ 1.0A 0 ~ 0.63A
Rated Power: 15W 15W 15W 15.12W
Ripple & Noise (Max.): 80mVp-p 150mVp-p 150mVp-p 240mVp-p
Voltage Tolerance: +5 / -3%
Line Regulation: Note.8 ±1% ±0.5% ±0.5% ±0.5%
Load Regulation: Note.8 ±1% ±0.5% ±0.5% ±0.5%
Setup, Rise Time: 100ms, 25ms / 230VAC, 100ms, 25ms / 115VAC at full load
Hold Up Time 100ms / 230VAC, 25ms / 115VAC at full load
Input
Voltage Rangev 85 ~ 264VAC, 125 ~ 373VDC
Frequency Range: 47 ~ 63Hz
Efficiency (Typ.) at 230VAC: 79% 82% 84% 85%
AC Current (Typ.)v 0.35A / 115VAC, 0.2A / 230VAC
Inrush Current (Typ.): 24

Protection
Over Load: Above 110% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed
Over Voltage: 115 ~ 145% rated output voltage
Protection type: latch-off mode
Working Temp.: -20 ~ +70°C (Refer to de-rating curve)

Environment
Working Temp:. -20 ~ +70°C (Refer to output load de-rating curve)
Working Humidity: 20 ~ 90% RH non-condensing
Storage Temp. & Humidity: -40 ~ +85°C, 10 ~ 95% RH
Temp. Coefficient: ±0.03% / °C (0 ~ 50°C)
Vibration: 10 ~ 500Hz, 2G 10min. / 1cycle, period for 60min. each along X, Y, Z axes

Safety & EMC
Safety Standards: Certified UL / cUL (ANSI / AAMI ES 60601-1; CAN / CSA-C22.2 No.60601-1); NFPA 99
Certified TUV (EN 60601-1; IEC 60601-1); MOPP approval
Withstand Voltage: I/P-O/P: 4KVAC
Isolation Resistance: I/P-O/P: 100M Ohms / 500VDC
EMI Conduction & Radiation: Certified EN 55011
Harmonic Current: Certified EN 61000-3-2; EN 61000-3-3
EMS ImmunityCertified :EN 60601-1-2; IEC 61000-4-2, 3, 4, 5, 6, 8, 11

Others
MTBF: 206.3K HRS Certified MIL-HDBK-217F
Dimension (WxHxH): 53.0x22.7x75.0 mm / 2.087x0.894x2.953 inch
Packing: 0.14kg; 108pcs / 16.12kg / 1.43CUFT


1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uF & 47uF parallel capacitor.
3. Tolerance: includes setup time tolerance, line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 10% to 100% rated load.
6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
7. Length of setup time is measured at first cold start. Turning ON/OFF the power supply continuously may increase the setup time.
8.The line regulation and load regulation are calculated based on output voltage.
Derating CurveUser-added image

 
Qty (ea.)/Carton108
Individual Box/Gift Box Size (mm)78*55*25
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)TBD
Gross Weight (kg)16.12
Label Width (mm)62.0 mm
Label Height (mm)40.0 mm
Input Configuration
DescriptionSolder Pins 2 * Ø1.05 mm, 3.5 mm Long, 20 mm Center to Center between Pins
Approvals
LogoDescription
User-added imageAttention Mark / Refer to operating manual for operating and service instructions
User-added image  CE Certification
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
User-added imagecRUus UL Recognized Component E172861 3rd Edition w-RM ANSI-AAMI ES60601-1 (2005 + C1:09 + A2:10) and CAN-CSA-C22.2 No. 60601-1 (2008)
User-added image

Double Insulation - Mark is on the label or Molded in the case
User-added imageIndoor Use Only - Mark is on the label or Molded in the case
User-added imageJAPAN TUV Rheinland-PSE GlobTek Inc to J60950-1(H26) , J55022(H22),J3000(H25).Please follow the procedure listed in the following link for proper import to Japan: http://en.globtek.com/importing-to-japan.php.
RoHS 2RoHS 2: Complies with EU 2011/65/EU and CHINA SJ/T 11363-2006 http://www.ce-mark.com/Rohs%20final.pdf
User-added imageUkraine UKRSepro (Document: www.globtek.com/html/iso_certificates/GT_Ukraine.pdf)
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case
Popular Products
SKUVolts OutCurrent Out (Amps)Connector
244408240.6254.5mm length @ 1.8mmØ + 3.5mm length @ 1.1mmØ = Total pin length 8mm
22785853.04.5mm length @ 1.8mmØ + 3.5mm length @ 1.1mmØ = Total pin length 8mm

Solicitud de Información