Request Information Download PDF
GTM41061-25VV-FW GTM41061-25VV-FW
Information
Model NumberGTM41061-25VV-FW
DescriptionGTM41061-25VV-FW, Medical Power Supply, PCB Mounted/DIP, Regulated Switchmode AC-DC, , Input Rating: 100-240V~, 50-60 Hz, , Output Rating: 25 Watts, 5-30V in 0.1V increments, Approvals: CB, CE, cETLus, cETLus 60601.1, China RoHS, Double Insulation, IP21, Level V -115 (15V+), PSE, RoHS 2, S-Mark, VCCI, WEEE
Agency Documentshttp://www.globtek.info/certs/GTM41061/
CE EC-Declaration for Medicalhttp://globtek.force.com/models/ec_declaration?id=a0Oa000000JBOT9EAP
CE EC-Declaration for Industrial/Commercial/ITEContact GlobTek for more information
RoHS/RoHS2 Declarationhttp://www.globtek.com/pdf/rohs_cert/a0Oa000000JBOT9EAP
REACH Declarationhttp://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttp://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypePCB Mounted/DIP
TechnologyRegulated Switchmode AC-DC
CategoryMedical Power Supply
Input Voltage100-240V~, 50-60 Hz
I/P Amps (A)0.6A
Wattage (W)25
Vout Range (V)5-30
EfficiencySee Approvals
Ingress ProtectionN/A
Size (mm)84*56*38
Enclosure
Rating Table
Model Number VoltageAmps (A)Watts (W) RFQ
GTM41061-1512-7.0-FW 5315 RFQ
GTM41061-1512-6.0-FW 62.515 RFQ
GTM41061-1512-3.0-FW 91.6614.94 RFQ
GTM41061-1812-FW 121.518 RFQ
GTM41061-1818-3.0-FW 151.218 RFQ
GTM41061-1818-FW 18118 RFQ
GTM41061-1824-FW 240.49.6 RFQ
SpecificationsA) ELECTRICAL SPECIFICATIONS:
1. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac
2. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60Hz
3. Output Regulation: +/- 5% measured at the output connector
4. Line Voltage Regulation: +/- 1% typical measures at full load
5. Output Ripple (Vp-p): 1% or 150 mV whichever is greater measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with 10 uf electrolytic capacitor connected at the end of output connector at nominal line
6. Turn-On/Turn-Off Overshoot: 5% maximum, 1mS typical recovery time for 25% step load
7. Turn-On Delay: 1 second typical
8. Hold-Up Time: 8mS typical @ nominal input voltage & full load
09. Inrush Current: 30A typical @ 115Vac input ; 60A typical @ 230Vac input
10. Switching Frequency: 66.5 KHz typical

B) PROTECTION
1. Over-Voltage: Protected via zener diode across the output
2. Short Circuit: Electronically Protected, unit will recover upon removal of fault
3. Input Protection: Input dual-fusing (for both line and neutral)

C) SAFETY
1. Dielectric Withstand Voltage: 5656 Vdc from primary to secondary
2. Touch Current: Maximum allowed values: 100uA NC(Normal condition) 500uA SFC(single fault condition)
3. Means of Protection: 2 x MOPP (Means Of Patient Protection)
4. ESD: 8 kV Contact/15kV Air Discharge

D) OTHER:
1. MTBF: 200,000 hours @ 25°C ambient temperature
2. Operating Temperature: 0°C to 40°C ambient temperature
3. Humidity: 0% to 93% relative humidity, passed 7 day humidity testing per IEC 60601-1
4. Storage Temperature: -10°C to 80°C

E) ENCLOSURE
1. Upper Housing: High impact plastic, 94V0 polycarbonate, non-vented
2. Lower Housing: High impact plastic, 94V0 polycarbonate, non-vented
3. Size: 84.0* 56.0*37.9 mm +/-1.0
4. Green LED "ON" indicates output power "Available"
Derating Curve
Qty (ea.)/Carton80
Individual Box/Gift Box Size (mm)117L*82W*L*59H
Individual Box/Gift Box ColorWhite
Master Carton Size (mm)462 x 342 x 300
Gross Weight (kg)15.2
Label Width (mm)45.8
Label Height (mm)40.5
Input Configuration
Description

Solicitud de Información